Rainer Kalwitz Designs Printed Wheelchair Spoke Guards

You can make your wheelchair as individual as you wish with exclusive spoke guards.

The design is printed and then stuck onto the spoke guards, which are then attached to the spokes on your wheels with the fixings that are supplied.

Made from High Impact Polystyrene (HIPS), the guards fit 22" and 24" wheels using a unique easy on/off clipping system, no nuts and bolts. 10 clips and 10 bands secure the guards to the spokes.

They measure 450mm in diameter and have a 100mm access hole in the centre on standard guards. The full cover guards also measure 450mm in diameter and have an inner guard with an access hole in the centre. The outer full cover can be removed. An instruction sheet is included.

Standard Guards

Standard guards are sold in sets and are made from high impact polystyrene of 18” (450mm) diameter with a 4” (104mm) access hole in the centre.

One set is comprised of:

1. Two printed and laminated spoke guards.
2. Ten injection moulded clips.
3. Ten locating bands
4. Instruction sheet for home assembly.

Full Cover Guards

Full cover guards are sold in sets and are made from high impact polystyrene of 18” (450mm) diameter.

One set is comprised of:

1. Two printed and laminated full cover spoke guards, no central hole.
2. Two ‘doughnut’ spoke guards.
3. Ten injection moulded clips.
4. Ten locating bands.
5. Four Dual Lock pads (part A).
6. Four Dual Lock pads (part B).
7. Instruction sheet for home assembly.