R8-2RS Wheelchair Bearings (1/2

R8-2RS Wheelchair Bearings (1/2"x1-1/8"x.3125")

608/8mm Wheelchair Bearing Removal/Installation Full Tool Kit

608/8mm Wheelchair Bearing Removal/Installation Full Tool Kit

6001-8-2RS Wheelchair Bearings (12.7x28x8mm)

WheelchairBearings® - bearings & tools made specifically for wheelchairs.

Kit Contains: 4x high-quality bearings - 2x cotton swabs (for cleaning and remove any old grease) - 2x acetone wipes (to clean hubs before re-greasing them) - 1x high-quality grease packet (to add an anti-seize barrier between the bearing and the hub) - Step by step instruction booklet to make sure you are on track.

Features:

  • Double lipped rubber seals keep water and grime out and grease in longer
  • ABEC 3 High-quality bearings make for a smoother ride
  • High-quality synthetic grease adds to a longer life, rust prevention, and smoother ride
  • Specifically made for wheelchair
In stock
£30.00 £36.00
Facebook Twitter Pintrest
WheelchairBearings Logo

Go faster, roll further

Spokz has teamed up with WheelchairBearings® in the USA to bring you tools and bearings specifically designed for the wheelchair market.

Manufacturers suggest you service your wheelchair at least once a year. Your wheelchair, if not properly maintained, can cause long-term damage to your body over time. Putting new bearings in your wheelchair and properly maintaining them is something you can do at home and will greatly reduce wear and tear on your body and allow you to go faster and roll further.
More zoom less squeak!

Wheelchair Bearing Locations

Bearing components

The Tech Stuff....

The original equipment manufacturer's (OEM) bearings are not necessarily the best or longest lasting bearings out there. However, you will not go wrong using OEM bearings. Just know that there are better bearings out there.

Bearings should be round. Most bearing manufacturers will use ABEC scale for measuring roundness. It is a little counter-intuitive, ABEC 1 is less round then ABEC 3. The higher the number the more round the ball. The scale is ABEC 1, 3, 5, 7 and 9. Some people advertise ABEC 11 but we can't currently find any literature to support it. Most OEMs use an ABEC 3 and some even use ABEC 1.

ABEC 3 or ABEC 5 bearings are fine, you don't need to go any higher unless you are going for a land speed record!

Used on the following wheelchair products:

  • Ki Mobility Front Forks: Catalyst, Tsunami
  • Quickie Lite Spoke Rear Wheel

Reasons To Upgrade....

  1. Most wheelchair bearings are not designed for performance usage.
  2. Most wheelchair bearings are not designed to maintain smoothness over the longest period of time.
  3. Most wheelchair bearings are not designed to be serviced easily.
  4. Most wheelchair bearings do not use the highest grade materials.
Write Your Own Review
You're reviewing:6001-8-2RS Wheelchair Bearings (12.7x28x8mm)
Your Rating

Delivery

Mainland UK

Here at Spokz our emphasis is on value for money and customer service. We now offer free tracked Express UK delivery with DHL on orders of over £50 to mainland UK. Any orders under £50 will be charged £5.50 for our DHL next day service or for smaller items you can choose £2.50 Royal Mail 48 Tracked which is a 2 working day service (not guaranteed).

All pre-order items are delivered free of charge to any destination apart from international orders.

When delivery is charged, it is our policy to only charge you what it costs us to post and package your item/s. Delivery costs are calculated per order and your delivery options will be shown prior to checkout. We use DHL for our standard deliveries which takes 1-2 working days to mainland UK. The vast majority of our DHL deliveries to mainland UK addresses arrive the next working day. With our smaller items we give you the option of using Royal Mail 1st Class and this can be selected at the checkout.

With orders shipped with DHL you will receive an email with tracking details and the option to divert your parcel to an alternative local address or to a DHL collection point.

Highlands, Islands & Northern Ireland

Deliveries to the Scottish Highlands and Islands, Northern Ireland, Isle of Wight, Jersey, Guernsey and the Isle of Man will incur a delivery charge. Unfortunately this is beyond our control as the majority of shipping companies now charge extra to these areas. However, we discount the delivery charge by the standard amount of £5.50 that we offer to our mainland UK customers if you spend over £50. Deliveries to these areas will take 2-3 working days.

Northern Ireland will incur a delivery charge of £15.50 if the value of the order is under £50, and £10 if over £50:
BT1-94

The following postcodes will incur a delivery charge of £18 if the value of the order is under £50, and £12.50 if over £50:
AB31-38, AB41-56, IV, KW1-17, PA21-38, PH4-44, PH49, PH50, GY1-10, HS1-9, JE1-4, KA27-28, PA21-50, PA60-78, PA80, ZE1-3, IM1-9.

The Isles of Wight and Scilly will incur a delivery charge of £11.50 if the value of the order is under £50, and £6 if over £50:
TR21-25, PO30-41

All orders placed before 11.00am will be shipped the same day and will be delivered within 1 to 2 working days to mainland UK and 2-3 days to the postcodes listed above. This excludes any pre-order items.

International Shipping

We can happily ship the majority of our items anywhere in the world. If you are from an international destination then please send us an email to [email protected] with the items you would like to order and your full address and we can get you a price for shipping.

Item not arrived?

Please wait for the DHL estimated delivery time on your tracking to pass before contacting us about an item which has not arrived. If your order has been shipped with Royal Mail you will need to allow 15 days for your parcel to arrive before we can take any action with Royal Mail. Unfortunately this is their policy.

If your item does not arrive within the specified times then it is our responsibility to find your item. Please contact us so we can track the shipment and make the necessary arrangements with the couriers.

Damaged or lost item/s?

If your package arrives damaged or has missing items it is imperative that it is either signed for as damaged or photos are taken of the damaged package. We need the evidence to be able to claim against the couriers and without it we cannot issue a refund or replacement to you.

Returns

Not happy with your purchase? No problem...

You have the right to cancel at any time from the moment you place your online order, and up to 14 days from the day you receive your goods. You need to notify us of your wish to cancel your order within this time period and you can do so by using the My Returns section in your account, by email or by phone. You then have a further 14 days from the date you notify us of your cancellation to return the goods. Sorry we cannot refund postage charges on delivery and return of goods, unless they are faulty (see below). Goods must be returned in ORIGINAL, UNUSED condition. Sex products cannot be returned for hygienic reasons.

**TYRES MUST NOT BE FOLDED IN ANY WAY UNLESS THEY ARRIVED WITH YOU LIKE THIS. FOLDED TYRES RETURNED WILL NOT BE REFUNDED AS THEY WILL BE DAMAGED DUE TO THE METAL BEADING BEING TWISTED**

Faulty goods?

If your purchase is faulty or damaged please contact us within 30 days from date of purchase before returning the item. We will send you a "no charge" replacement, postage free. Before we issue a refund or replacement, you will need to return the damaged product to us for assessment. If the product is faulty we will refund your return postage costs.

All products come with a 1 year manufacturers guarantee. Faults MUST be reported within this time otherwise unfortunately we cannot replace the item.

Method of refund?

Spokz will refund your original purchase debit or credit card. Refunds issued will be back in your account in 3-5 working days.

First impressions...

How to Remove and Replace a Wheelchair Rear Wheel Bearing

In this video, we will remove and replace a wheelchair rear wheel bearing using tools designed for wheelchair users. The tools are designed to reduce damage to wheelchair parts when normal shop tools are used.