Go faster, roll further
Spokz has teamed up with WheelchairBearings® in the USA to bring you tools and bearings specifically designed for the wheelchair market.
If you want your wheelchair to move faster, go farther and smoother, then you have to maintain your wheelchair’s bearings. Your wheelchair has bearings in three places: front caster, front fork, and rear wheels.
Most wheelchair manufacturers say you need to re-grease or change your front caster bearings yearly, and the forks and rear bearings as needed. With the right tools, this is easy to do.
This kit includes R10/99502H or 5/8" ID Blind Bearing Puller/Extractor, Pin Punch, and R10/99502H or 5/8" ID bearing press which allows you to remove and replaceR10/99502H or 5/8" ID bearings found in many sport wheelchair rear wheels. For example rugby wheelchairs.
More zoom less squeak!
Problems this product solves
- Automotive bearing pullers pull from the lip of the inside ring of the bearing, but a wheelchair hub axle sleeve can prevent the puller from grabbing the ring
- Bicycle bearing pullers are very expensive and do not come in imperial sizes.
- Rear wheelchair wheels sometimes have a recessed bearing on one side to accommodate the quick release axle. Most bearing pullers are not long enough to use a wrench.
Warning
Improper removal or installation of bearings can permanently damage casters, rear wheel hubs or caster stems. Please use caution when using brute force. Make sure you know the size and types of bearings on your wheelchair and buy the right sizes.
How to remove and replace wheelchair rear wheel bearings
In this video, we will remove and replace a wheelchair rear wheel bearing using tools designed for wheelchair users. The tools are designed to reduce damage to wheelchair parts when normal shop tools are used.
Specifications
- Easy to use - this tool is designed specifically to remove bearings from wheelchair rear wheels
- Cost-effective - you don’t have to buy an entire set of tools just for one or two sizes
- The right tool for the job - most bearing tools are designed for bicycles or cars, not wheelchairs, so you have to make them work, which can damage your gear
- Less risk of damage - a specialised tool reduces the risk of damaging casters as compared to using a flat head screwdriver
- Specialised design - designed to accommodate recessed hub for rear wheelchair wheels
Shipping & Returns
Here at Spokz our emphasis is on value for money and customer service. We now offer free tracked Express UK delivery with DHL on orders of over £50 to mainland UK. Any orders under £50 will be charged £6.25 for our DHL next day service or for smaller items you can choose £2.50 Royal Mail 48 Tracked which is a 2 working day service (not guaranteed).
All pre-order items are delivered free of charge to any destination apart from international orders.
Find our more about our delivery & returnsR10 / 5/8" Wheelchair Bearing Removal/Installation Tool Kit
This kit includes R10/99502H or 5/8" ID Blind Bearing Puller/Extractor, Pin Punch, and R10/99502H or 5/8" ID bearing press which allows you to remove and replaceR10/99502H or 5/8" ID bearings found in many sport wheelchair rear wheels. For example rugby wheelchairs.
Go to full descriptionPeople Also Viewed
People who bought this product, also viewed these:
